FluteBrain
Public early access
Documentation / Getting started

Getting started guide

Send your first customer quote in about ten minutes. FluteBrain is in public early access and is built for packaging and corrugated converters. This page covers the path that is available today, the units the calculators use, and what to check by hand.

About 10 minutes No account needed to read

Your first quote

  1. Create your account

    Go to Register, use an email you'll keep, and open the verification link we email you. Then name your company.

  2. Add a customer

    Under Customers, enter the company name and bill-to address. Contacts and notes are optional.

  3. Add an item

    Under Items, add the finished product (for example, a 12 x 10 x 8 RSC) and, if you want to reuse it, the board it is made from.

  4. Build an estimate

    Open Packaging Costing to calculate board, ink, and run time, then save the result as an estimate. You can also create an estimate directly and type in your own cost lines.

  5. Check the numbers

    Review cost, selling price, and margin. Choose either a markup or a target margin.

  6. Create the quote

    From the estimate, choose Create quote. The quantities, prices, and notes carry over, and the quote keeps a link back to its estimate.

  7. Export the PDF and send it yourself

    Then use Mark as sent to record when and how it went out.

  8. Record the answer

    When the customer replies, mark the quote accepted or rejected.

The dashboard checklist follows the same steps and checks them off as you go. You can minimize it at any time.

Worked example: a regular slotted carton

This is an illustration of how the pieces fit together. The figures are made up. Use your own board rates, sheet sizes, and operation times.

Job
5,000 RSC cartons from one 48 x 40 in. sheet, 2 up per sheet.
Board
The board rate you pay, entered per MSF. If your supplier prices by the sheet, Board Unit Cost converts a sheet cost into a per-MSF rate.
Waste
An extra material allowance, such as 5%, for setup spoilage and scrap.
Sheets needed
The calculator divides the cartons you need by the pieces per sheet, adds the waste allowance, and rounds up to whole sheets.
Operations
Setup hours plus run time for each operation, such as printing, die cutting, and gluing, using finished units per hour.
Result
A cost per thousand and a total, which you save as an estimate and turn into a quote.

Units and assumptions

Knowing how the calculators count will help you spot a number that looks wrong before it reaches a customer.

MSF
One thousand square feet of board. Board rates in Packaging Costing and the price book are per MSF.
MSI
One thousand square inches. Board Unit Cost shows a sheet's area in MSI alongside MSF.
Sheets
Counted as whole sheets. The calculator rounds up because you cannot buy part of a sheet.
Waste
An additional material allowance on top of the sheets the layout needs.
Run speed
Finished units per hour, not sheets per hour. Enter setup time separately from run time.
Layout
Rectangular, in normal or rotated orientation. Check grain direction, flute direction, trim, tooling, and the capability of your machine yourself.
Markup vs. margin
A 25% markup on cost is not a 25% margin on price. Pick one mode per estimate and read the margin it shows.
Rounding
Your company settings control how many decimals appear on selling prices. Manufacturing rates keep more precision than the price you show on the quote.
Unit converterHandles the rest. Free to use without an account.

Sending a quote

On Free you export the PDF and send it the way you already do, by email, through your customer's own portal, or print. Estimating Pro can also email the quote from FluteBrain with a secure link your customer uses to accept, reject, or request changes.

  1. Open the quote and export the PDF. Check it before it leaves your hands.

  2. Send it to the customer yourself.

  3. Choose Mark as sent. Add a note such as who received it and how.

  4. Mark it accepted or rejected when you hear back.

A sent quote is locked so the customer's copy never changes. If something needs to change, create a revision. It starts as a new linked draft and the original stays as it was.

Current limits

This is early access. Please read these before you rely on a result for a live offer.

Review every estimate
The calculators are aids, not a substitute for an estimator. We have not yet validated them against a set of real historical jobs, and we make no promise that a result matches what your plant would price.
Supported work
Rectangular sheet layouts and simple per-hour operations. Complex nesting, multi-up irregular layouts, and detailed routing are not supported. Price those by hand and enter your own cost lines.
Stock quantities
A number you type in on items for the whole company. Nothing in the app updates them for you.
Not in this release
Customer orders, job tracking, shipping and receiving, and inventory movements. Emailing quotes with a secure approval link is part of Estimating Pro. Invoicing and payments stay outside the app.
Free and Pro
Customers, items, estimates, and quotes are unlimited, and PDFs carry no watermark. Reusable price books and customer-specific pricing are part of Estimating Pro. Free accounts include three team seats.
Keep your own copies
Of anything your business cannot afford to lose. Features and limits may change while we are in early access.

Getting help

Questions, a result that looks wrong, or a job the calculators cannot handle? Email support@flutebrain.com. Please do not send passwords or sign-in links.

You can also send feedback from inside the app. Sharing a calculation with us is always optional and you can withdraw it later. Our Privacy Notice explains how that works.